Computer GraphicsComputer Graphic







This won't take long.  My interests can be summed up 
in one word,
COMPUTERS

My New Computer

Well I put it off as long as I could but I just had to have a faster computer. First of all the case is a Aopen mid tower with three 5 1/4 slots and two 3 1/2 slots. The motherboard is a Aopen AX6BC which has the Intel 440BX chipset. It has five pci slots and two isa slots and a AGP slot. It has 3 dram slots which will hold a total of 768 meg of memory. I used one 128 meg 7 ns chip for the memory. The processor is a Intel Celeron 400mhz which I am running at 450mhz (UPDATE- -Replaced the 400 with a 1.1ghz Celeron using a slot-1 converter card). The harddrive is an IBM Deskstar 16, 10.1gb with 9.5 access time and udma 33 and I am using a 8.5 gb Maxtor for my backup drive. I am using a Creative Labs Riva TNT 16meg 2d-3d video card. I also have the Creative Labs 5X DVD and 32X CD rom drive. The sound card is a Creative Labs Soundblaster Live. I have a 100meg internal Zip drive on a IDE cable and am very happy with the transfer speeds. The monitor is a 17" Mag Innovision DX700-T with a .25mm aperture grille pitch. I use a Logitech marble+ trackball for a pointing device and I am running a Epson Stylus Color 800 printer with a USB adapter cable that prints at 1440x720. I have a HP 4100 scanner on USB and a four port external powered USB hub. I also have a APC 200 UPS that is a lifesaver. This computer is doing a really good job and the bios with my motherboard is already set up for a PIII, 600, so I will be able to replace the processor with a faster one later on when the prices drop.


If you want some good info on computers and how to set them up try this site.

Tom's Hardware Guide



If you want info on modems of any kind this is the place to go

Curt's High Speed Modem Page